Dear Luclan,
I answer below:
On 28-03-2024, LucLan <
address@is.invalid> wrote:
Julian Macassey <julian@n6are.com> wrote:
Nobody wants to help me :(
What a cruel world :'(
What is your current SWR?
ch 1: 1,2
ch 40: 1,5
It's not so bad, but if you see SWR lower in low channel and higher in
high channel, it means that the antenna is set for a lower channel than
the 1. You can maybe improve by shorten the strand of the antenna the
little bit (not cut) but tuck it a little bit in the base (if possible).
Have you lengthened or shortened it?
No. Never cut it.
Is it a full 1/4 wave?
No. It is 5/8 wave. It is 1420mm long.
Is it working at the moment?
Yes.
Thank you for your answer.
Best regards, 73,
Frederic
--
La communication est la base de la reflexion :-)
Frederic Miremad
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)