1. Forum
  2. Usenet
  3. COMP.EMULATORS.APPLE2

  • AppleWin Version 1.30.18.0 Released

    From Hugh Hood@21:1/5 to All on Sat Mar 23 20:28:19 2024
    Tom Charlesworth has released the latest version of his AppleWin emulator.

    Since I believe Tom does not currently have access to the newsgroups,
    I'll put this up.

    From his github site:

    1.30.18.0 - 23 Mar 2023 -----------------------------------------------------------------
    [Change #1272] New HDC firmware v2 to support returning HDD size in Y:X
    for status call. [@peteri]

    [Change #1277] Add (debug) cmd line switch to revert to HDC firmware v1: -hdc-firmware-v1.

    [Change #1279] Support Saturn RAM card in slot 3 for any Apple II model
    (for Robo Systems' RoboCAD 2). cmd line switch: -s3 Saturn

    [Change #1159] Speaker: change from mono to stereo sound buffer.

    [Change #1247] Robocom's Interface Module dongle: use actual values for
    1000 & 1500 series dongles.

    [Bug #1261] Fix for $C010 which should not read the keyboard latch on
    Apple II and Apple II+.

    [Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is on
    stack and SP points to ABS16!

    [Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity.


    I'll add that running RoboCAD 2 (which requires a Saturn 128K card
    emulation in a slot other than slot 0) works very well!


    <https://github.com/AppleWin/AppleWin/releases>





    Hugh Hood

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From MummyChunk@21:1/5 to All on Wed Oct 16 19:31:27 2024
    Hugh Hood wrote:
    Tom Charlesworth has released the latest version of his AppleWin
    emulator.

    Since I believe Tom does not currently have access to the
    newsgroups,
    I'll put this up.

    From his github site:

    1.30.18.0 - 23 Mar 2023 -----------------------------------------------------------------
    [Change #1272] New HDC firmware v2 to support returning HDD size in
    Y:X
    for status call. [@peteri]

    [Change #1277] Add (debug) cmd line switch to revert to HDC
    firmware v1:
    -hdc-firmware-v1.

    [Change #1279] Support Saturn RAM card in slot 3 for any Apple II
    model
    (for Robo Systems' RoboCAD 2). cmd line switch: -s3 Saturn

    [Change #1159] Speaker: change from mono to stereo sound buffer.

    [Change #1247] Robocom's Interface Module dongle: use actual values
    for
    1000 & 1500 series dongles.

    [Bug #1261] Fix for $C010 which should not read the keyboard latch
    on
    Apple II and Apple II+.

    [Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is on

    stack and SP points to ABS16!

    [Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity.


    I'll add that running RoboCAD 2 (which requires a Saturn 128K card
    emulation in a slot other than slot 0) works very well!


    https://github.com/AppleWin/AppleWin/releases





    Hugh Hood

    Anyone have any experiences to share with this
    version?


    This is a response to the post seen at: http://www.jlaforums.com/viewtopic.php?p=662342851#662342851

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)