1. Forum
  2. Usenet
  3. COMP.HOME.AUTOMATION

  • OmniPro II "No controller Data" after lightning strike

    From bfschroe@21:1/5 to All on Wed Mar 22 04:38:16 2017
    I have an OPII with a remote zone board in a pool house. Since a bad storm all keypads are beeping and showing "no controller data" . The 2 indoor zone expander boards status LED are blinking rapidly.

    Best guess is a surge on the low voltage comm bus.

    Any guidance on where to look to troubleshoot?

    Thanks
    Bruce Schroeder

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From hungkd19@gmail.com@21:1/5 to bfschroe on Mon Apr 2 23:48:27 2018
    On Wednesday, March 22, 2017 at 6:38:19 PM UTC+7, bfschroe wrote:
    I have an OPII with a remote zone board in a pool house. Since a bad storm all keypads are beeping and showing "no controller data" . The 2 indoor zone expander boards status LED are blinking rapidly.

    Best guess is a surge on the low voltage comm bus.

    Any guidance on where to look to troubleshoot?

    Thanks
    Bruce Schroeder

    see the status LED, if not heart breath or no light that mean controller was dead. you can contact to Leviton to request repair

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)