1. Forum
  2. Usenet
  3. REC.AVIATION.SOARING

  • Fire warning light panel indicator and test button How to Remove for ne

    From J M I@21:1/5 to All on Wed Jan 25 08:09:47 2023
    Anyone with experience concerning removing the fire warning bulb indicator installed on the self launching ventus ? My rig is a Ventus 2cxm 2007. The light bulb is within a circular housing which has no hex nut screw type of fastener. It appears that
    the unit is installed by a pinch clamp mechanism. This unit is also wired to the nearby test button.
    I would hate to ruin the mechanism by applying a force that would do more harm than good, as I need to reinstall the unit to a new panel I am constructing. If anyone has experience and can offer advice I would be so happy to hear from you !

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From George Underhill@21:1/5 to J M I on Thu Jan 26 13:54:34 2023
    On Wednesday, January 25, 2023 at 10:09:49 AM UTC-6, J M I wrote:
    Anyone with experience concerning removing the fire warning bulb indicator installed on the self launching ventus ? My rig is a Ventus 2cxm 2007. The light bulb is within a circular housing which has no hex nut screw type of fastener. It appears that
    the unit is installed by a pinch clamp mechanism. This unit is also wired to the nearby test button.
    I would hate to ruin the mechanism by applying a force that would do more harm than good, as I need to reinstall the unit to a new panel I am constructing. If anyone has experience and can offer advice I would be so happy to hear from you !

    Hopefully someone with experience will reply, but if that fails I would contact SH dealer Garret Willat. If he can't supply the answer I'm sure the SH factory could offer assistance. Hope you can remove it intact.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)