1. Forum
  2. Usenet
  3. REC.CRAFTS.METALWORKING

  • Re: 5hp B&S flathead head bolt torque?

    From Clody@21:1/5 to All on Fri Oct 14 03:15:04 2022
    140 inc pound (15.93 Nm ) looks like too much, big chance fore the 5/16 bolts been broken off, i belive more off 45-50 inch pound ( 4-5 Nm)

    --
    For full context, visit https://www.polytechforum.com/metalworking/5hp-b-s-flathead-head-bolt-torque-144889-.htm

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From John B.@21:1/5 to 63fe0a3266c3dc7b6c7c7fbac89ccef3@ex on Fri Oct 14 10:58:54 2022
    On Fri, 14 Oct 2022 03:15:04 +0000, Clody <63fe0a3266c3dc7b6c7c7fbac89ccef3@example.com> wrote:

    140 inc pound (15.93 Nm ) looks like too much, big chance fore the 5/16 bolts been broken off, i belive more off 45-50 inch pound ( 4-5 Nm)

    Standard torque recommendations https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx

    --
    Cheers,

    John B.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jim Wilkins@21:1/5 to 63fe0a3266c3dc7b6c7c7fbac89ccef3@ex on Sat Oct 15 17:26:35 2022
    "John B." wrote in message
    news:ahnhkh92t9rsbrvt6t2g3c6ga1mmef25op@4ax.com...

    On Fri, 14 Oct 2022 03:15:04 +0000, Clody <63fe0a3266c3dc7b6c7c7fbac89ccef3@example.com> wrote:

    140 inc pound (15.93 Nm ) looks like too much, big chance fore the 5/16
    bolts been broken off, i belive more off 45-50 inch pound ( 4-5 Nm)

    Standard torque recommendations https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx

    --
    Cheers,

    John B.

    -------------------------

    What John said.

    If you don't believe it, torque a bolt + nut to destruction yourself. Try to notice the change in feel when it starts to let go.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Clody@21:1/5 to All on Sun Oct 16 17:45:03 2022
    How can a bolt of 5/16 been tighten with 140 inch pound...ho steel quality have this bolt🤔

    --
    For full context, visit https://www.polytechforum.com/metalworking/5hp-b-s-flathead-head-bolt-torque-144889-.htm

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Snag@21:1/5 to Clody on Sun Oct 16 16:35:48 2022
    On 10/16/2022 12:45 PM, Clody wrote:
    How can a bolt of 5/16 been tighten with 140 inch pound...ho steel
    quality have this bolt🤔


    You're confusing FOOT pounds with INCH pounds . 140 In/lbs is less
    than 12 ft/lbs .
    --
    Snag
    "You can lead a dummy to facts
    but you can't make him think."

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)