From Bob La Londe@21:1/5 to All on Thu Aug 3 19:14:27 2023
I'm in the process of acquiring the bits and material to setup a home
shop anodizing setup. Lye is cheap at Home Depot for the de-smut bath. Sulfuric acid is pretty cheap at O'Relly Auto for the anodizing tank. I
had talked to a salesperson there a few years ago, but I when I checked
their website I discovered they stock it in upto five gallon containers
pretty cheap in at least one of the local stores. I make distilled
water in the shop that I use with my water soluble cutting fluid. The
still has a 25 gallon tank so that's no issue. I've got a hot plate on
the way for the sealing bath along with an affordable "laboratory" DC
power supply. I'm still deciding on working containers, and if I wind
up doing very much of this I may want to find a better source of
titanium wire. I guess I could use aluminum wire, but I see most of the
home shop tubers using titanium. I bought a couple 25ft spools to start
with anyway. This might be a short lived side project. It could be all
I ever need.
--
Bob La Londe
CNC Molds N Stuff
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com