From Snag@21:1/5 to All on Mon Apr 14 20:45:08 2025
Mounting a drill chuck in the lathe came up , so I put one of mine in
the lathe . My spindle is 3MT and the chuck tang is 2MT so an adapter
sleeve was used . This is just "a chuck" , nothing special . Runout at
the chuck was .003 TIR , at 12 inches from the chuck it was .012" . The
rod stock I used was a piece of 1/2" O1 drill rod . The rod is over 24"
long , but I did not consider sag to be a factor in the measurement I
was doing .
--
Snag
We live in a time where intelligent people
are being silenced so that
stupid people won't be offended.