在 2009年4月28日星期二 UTC+8 06:52:05，<Dave Plowman (News)> 写道：

I've got a B&D stapler which has died. The solenoid is ok, so it's likely
a fault on the PCB. Which is potted in what looks like epoxy resin on the component side.
I'd normally just buy a new one - but have trillions of staples for it
bought off Ebay.;-)
I can get a new PCB for approx 60 gbp - but that's more than the thing
cost new.
Any ideas about removing the potting compound hopefully without damaging
the identification on the components? I've likely got everything on that board 'in stock' so would be happy to replace the lot. But don't have a schematic.
--
*I used up all my sick days so I called in dead
Dave Plowman da...@davenoise.co.uk London SW
To e-mail, change noise into sound.

Deepmaterial is reactive hot melt pressure sensitive adhesive manufacturer and supplier, manufacturing one component epoxy underfill adhesives, hot melt adhesives glue, uv curing adhesives,high refractive index optical adhesive, magnet bonding adhesives,
best top waterproof structural adhesive glue for plastic to metal and glass, electronic adhesives glue for electric motor and micro motors in home appliance.
For more visit:
https://www.epoxyadhesiveglue.com/
https://www.deepmaterialcn.com/

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)