I have a Behringer power mixer (PMX1000) that features a DSP effects
module with a 2-digit 7-seg display.
The DSP module is a daughterboard with legend on it DPM5 PCB304030REVI
Photo here https://community.musictribe.com/discussion/products/24/34/324663/dpm5-effects-module-error-d2
It has a TMS57002 DSP and P80C32SBAA microcontroller and EDO DRAM (2 off HY514404).
On power up, the display shows F1 for about 100ms and then stays on d2
I only have a schematic for the main mixer board, which basically
contains just the 7-seg displays, so I am assuming the d2 code
originates from the software running on the DSP board.
I have seen some threads suggesting replacing the DRAM fixed it, but I
have tried that (once) with no effect.
Does anybody have a schematic or any official info on what the d2 code specifically means?
Sysop: | Keyop |
---|---|
Location: | Huddersfield, West Yorkshire, UK |
Users: | 483 |
Nodes: | 16 (0 / 16) |
Uptime: | 81:43:57 |
Calls: | 9,576 |
Calls today: | 7 |
Files: | 13,666 |
Messages: | 6,143,070 |
Posted today: | 2 |