I have a need to use some nichrome wire for an outdoor project where it
will be partially exposed to the elements (mainly humidity extremes but
also might get wet at times). Is it corrosion proof? Thank you.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Tuesday, November 23, 2021 at 7:49:07 AM UTC-5, Ruk wrote:

I have a need to use some nichrome wire for an outdoor project where it
will be partially exposed to the elements (mainly humidity extremes but
also might get wet at times). Is it corrosion proof? Thank you.

Nothing, not even fine gold, is corrosion-*proof*. But, there are grades of Nichrome from -20 to -80, as the nickel content increases, its general resistance to corrosion also increases - with caveats.

Nichrome-80 is suitable for exposed use and corrosion-resistant at very high temperatures, and is most used for critical applications. Nichrome-60 is most commonly used in household devices such as toasters and space-heaters, as well as back-up heat in
older heat-pumps and electric house furnaces and similar. Nichrome-20 is often used for fasteners and clamps that do not carry power, but must be heat-resistant and relatively corrosion-resistant.

For high-humidity environments, specifically, N-60 is the most commonly used - as a specific example - the heating element in a clothes dryer.

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Tue, 23 Nov 2021 07:49:01 -0500, Ruk <rthekeeper@zed.net> wrote:

I have a need to use some nichrome wire for an outdoor project where it
will be partially exposed to the elements (mainly humidity extremes but
also might get wet at times). Is it corrosion proof? Thank you.

It is water resistant and does not corrode unless it gets very hot.

Steve

--
Neural Network Software for Windows http://www.npsnn.com

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

It is water resistant and does not corrode unless it gets very hot.

Careful! That depends very much on the formula. -60, -70 & -80 are formulated to be corrosion-resistant *WHEN* hot. -70 has the highest operating temperature.

https://temcoindustrial.com/product-guides/wire-cable-and-accessories/resistance-and-non-resistance-wire/nichrome-wire tells some, but by no means all of the story.

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Ruk wrote:
=========

I have a need to use some nichrome wire for an outdoor project where it
will be partially exposed to the elements (mainly humidity extremes but
also might get wet at times). Is it corrosion proof? Thank you.

** Can't you coat is in a lacquer to keep water off ?
Will it get hot?

So many questions, so few answers.

.... Phil

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Tue, 23 Nov 2021 07:49:01 -0500, Ruk <rthekeeper@zed.net> wrote:

I have a need to use some nichrome wire for an outdoor project where it
will be partially exposed to the elements (mainly humidity extremes but
also might get wet at times). Is it corrosion proof? Thank you.

My house has a nichrome wire bathroom wall heater. No corrosion in
about 50 years in a rather wet and humid bathroom environment.
However, I'm not sure what nichrome will do in a marine (salt)
environment. My guess(tm) is that it's ok but it might help to check
if you're using it in a marine environment.




--
Jeff Liebermann jeffl@cruzio.com
PO Box 272 http://www.LearnByDestroying.com
Ben Lomond CA 95005-0272
Skype: JeffLiebermann AE6KS 831-336-2558

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

** Can't you coat is in a lacquer to keep water off ?
Will it get hot?

Nichrome. Lacquer. Water. Think about it.
"Water damages lacquer by turning it milky and hazy. Finishers call this milkiness "blushing" when it occurs while the finish is being applied. Water also can be responsible for the white rings produced by hot or wet glasses and pots left standing on a
lacquered tabletop."

Nichrome is chosen, typically, for its heating quality under power.
Lacquer is generally not a heat-resistant product.
Lacquer is also not a water-resistant product as normally formulated.

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Peter W. wrote:
------------------------

** Can't you coat is in a lacquer to keep water off ?
Will it get hot?

Nichrome. Lacquer. Water. Think about it.

** Acrylic lacquer is waterproof.

Nichrome is chosen, typically, for its heating quality under power.

** In electronics it is used for its zero tempco of resistance.

FFS I posted question, not statements.

YOU should do the same - asshole.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

"Acrylic" lacquer is not lacquer.

The correct formula Nichrome to the use needs no protection. It would make sense to choose the correct formula rather than to go to heroic measures to protect the wrong one.

Heating would obviate the applied 'protection' in any case.

Eschew needless complexity - William of Occam

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Peter Wanker is not Human wrote:
====================

"Acrylic" lacquer is not lacquer.

** ROTFLMAFAO !!!!!!!!!!!!!!!!

The correct formula Nichrome to the use needs no protection.

** What use ?????

Heating would obviate the applied 'protection' in any case.

** Bollocks .

Wot a fucking nut case IDIOT



... Phil

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Peter Wanker is a Ridiculous IDIOT wrote: ========================================

We have four (4) carpets made in Egypt that we purchased in Saudi Arabia.

** But do any of them fly ?
If so - go take a ride on one.

Drongo: Define your terms;

** FFS you illiterate, autistic bloody fool - read what I *actually* wrote !!!


..... Phil

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

We have four (4) carpets made in Egypt that we purchased in Saudi Arabia. They are of a typical "oriental" pattern and may be seen here:

https://images.rugimg.com/3119204/3119204_image_1010.jpg?width=2000&quality=55&height=2000&fit=bounds

However, they are as much an Oriental Rug as 'Acrylic' lacquer is lacquer. Being as they are made of polypropylene on a machine. Lacquer, to anyone that restores vintage radio is *only* a liquid made of shellac dissolved in alcohol. Synthetic 'lacquer'
is entirely something else, of course.

Drongo: Define your terms; it will look less the idiot that you are.

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

As it happens, you wrote a whole lot of garbage to make yourself look useful. But had nothing to do with the question at hand.

Drongo:

A fool, a simpleton, an idiot.

Peter Wieck
Melrose Park, PA

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)